wynns - castrol logosWe stock:

  • Wynn’s Products
  • Castrol lubricants
  • Batteries
  • Anti-freeze



Injector Cleaner (Diesel).  In order for a vehicle to perform as it was intended, it is essential that the injectors remain clean and free of build-up.  Deposits on the fuel injectors can accumulate rapidly due to poor diesel fuel quality.  These deposits can adversely affect the ideal spray pattern from the injector nozzle, which is essential for optimum vehicle performance.  These build-ups directly affect the engine power, fuel consumption, emissions (black smoke) and the general performance of the vehicle.

Injector Cleaner (Petrol).  During every day driving deposits form on the tips of fuel injectors.  These deposits can adversely affect the ideal spray pattern from the injector nozzle, which is essential for optimum vehicle performance.  Deposits are particulary troublesome in today’s home to shop stop starting driving environments, with the result being dirty injectors, irregular idling, loss of power, difficult cold start.  These deposits can start to occur after only 2,400 km’s of driving,

Radiator Flush. Cooling system failure and overheating of the engine is the leading cause of mechanical breakdowns.  Rust, grease, sludge and scale build-up all contribute to the likelihood of cooling system failure.  By not using a flush damaging debris remain in the cooling system, slowly deteriorating internal components and seriously impairing the proper function of the radiator and cooling system.  Wynn’s Radiator Flush safely removes rust, grease and scale from the entire cooling system ensuring the new coolant works at its maximum potential, not having to work against a dirty system hat can shorten coolant life.  Wynn’s Radiator Flush contains no harsh acid or alkali compounds and will not attack cooling system components.

Engine Flush. With time even the best engine oil deteriorates and contaminates the engine with gums and varnish deposits that a simple oil change just cannot remove.  Any new oil may be compromised and be contaminated by deposits left behind.  Extended service intervals are placing higher demands on today’s engine oils, making it now even more important to ensure that the new oil is give the optimum chance to protect the engine.  Most engine flushes are solvent-type based products, they tend to reduce the lubrication of the oil.  If this type of flush is left in the engine too long mechanical damage can occur and engine seals can be affected.  Damage may bot be visible but is irreversible.  Wynn’s Engine Flush has been formulated to gently dissolve and remove internal engine contaminants by suspending them in a high level of dispersants.  The non-solvent formula assures maximum drainage of the contaminants with the used oil, thereby minimising new oil contamination.


Castrol Magnatec – Instant protection from the moment you turn the key.

Up to 75% of engine wear happens while your engine warms up.  When the engine stops oils drain off critical engine parts, however, Castrol Magnatec has Intelligent Molecules that continue to cling to your engine like a magnet providing an extra layer of protection.  They bond to metal surfaces in your engine, forming an extra layer of protection, dramatically reducing engine wear.  Because they cling to critical engine parts, the protection is already there when you need it most – while the engine warms up.  Out intelligent molecules are protecting your engine 24/7, 365 days a year.  That’s their job and it’s what makes Castrol Magnatec, Castrol Magnatec.

Castrol Edge Range, Castrol GTX Modern Engine 15W-40, Castrol Magnatec Range, Castrol GTX Diesel 15W-40.